With the continuous development and innovation of electrostatic powder, it has an impact on our current life in all aspects, and it also gives us a clearer understanding of it. What is the way to make up electrostatic powder with a hand spray gun?

Due to the complexity of the cross-sectional shape of the aluminum profile, in the production process, as the inner corners of the decorative surface, transverse grooves, grooves, etc. are places that are not easy to be sprayed by the automatic spray gun, and the hand spray gun must be used. When the nozzle of the hand spray gun points at the place to be resprayed of the workpiece, if the transmission pressure is adjusted too large, and the distance between the hand spray gun and the workpiece is too close, it will easily cause orange peel, flow marks, pinholes, gun shots, fat edges, etc. on the surface of the workpiece. Under normal circumstances, when the nozzle of the hand spray gun is facing the place to be sprayed on the workpiece, the transmission pressure should be 1.2～1.8bar, and the distance between the hand gun and the workpiece should be controlled at 80～150mm.

Electrostatic powder is widely used in our lives and makes our lives more colorful. With the changes in society and technology, everything around us is constantly progressing and improving.